Lumissil and BMW demonstrate power line communication across an 800 V Gen6 battery system
By Eve
BMW Group and chipmaker Lumissil Microsystems have demonstrated power line communication (PLC) across a complete BMW Gen6 800 V battery system, using a "No New Wire" approach that links the central BMS controller and the cell supervisory circuits through the battery's existing electrical infrastructure. Bidirectional, multi-node tests covered cell measurement data and control commands at cell and complete-battery levels, under varying voltage and current conditions. The Gen6 battery launched in the BMW iX3 in 2026, and the work was reported by EVNews on 19 November 2026.
Why it matters
Lumissil says removing dedicated communication wiring and connectors could cut battery weight and cost and improve reliability, which may shape future vehicle architectures and the 800 V fleets that charging networks will need to serve. It is a demonstration rather than a production commitment, so procurement teams should treat it as a signal to watch, not a near-term change in specification.
Source
- Original title
- “Lumissil and BMW demonstrate power line communication across an 800 V Gen6 battery”
- Published
- 19 November 2026
- Updated
- 20 November 2026
In this story
- Topic
- EV Charging
- Place
- Global
Related news
BMW begins production of the long wheelbase iX3 L in China, with deliveries starting on 25 November
BMW Brilliance Shenyang has rolled out production units of the lengthened iX3 L electric SUV, with sales and deliveries officially starting on 25 November, according to Autohome as reported by paultan.org on 20 November 2026. Order books have been open in China since August, and the iX3 L is offered in 30L, 40L xDrive and 50L xDrive variants, producing 265 PS (195 kW), 374 PS (275 kW) and the same output as the short wheelbase model respectively. The i3 L sedan is due to launch on 27 November at the Auto Guangzhou show, and the model has also appeared on a Malaysian BMW website.
Why it matters
A new volume EV platform entering production in China, with a sedan sibling following two days later and a possible Malaysian launch, points to further growth in the EV parc in both markets. CPOs and procurement teams in those regions should factor these models into future charging demand and site planning.
BMW electric M3 prototype uses four motors and simulated gears to shape handling, says L'argus first drive
L'argus published Mathieu Sentis's first drive on 17 November 2026, after a session at the Miramas circuit on 10 November. The prototype, billed at 850 hp, uses four motors to help turn in, hold grip and let the rear slide progressively, and adds simulated gears via the paddles. BMW's 14 January 2026 communication set out an 800 V electrical network, one motor per wheel, central control called BMW M Dynamic Performance Control with the Heart of Joy computer, and a front axle that can be decoupled.
Why it matters
An 800 V performance model from a major brand adds to the high voltage vehicles that CPOs and procurement teams should plan for on future networks. The source gives no charging power or timing figures, so hardware specification decisions should wait for BMW's published charging data.
BMW extends V2G charging with E.ON to the i3, iX4 and iX5, worth up to €720 a year
BMW has added the new i3, iX4 and iX5 to its V2G programme with E.ON, so four Neue Klasse models can now take part alongside the iX3, which was first. The package pairs the BMW Wallbox Professional bidirectional home charger with an E.ON tariff, paying €0.24 for every hour the vehicle is connected with V2G activated, whether or not power is exported, capped at €60 a month or €720 a year. Customers also receive €0.42 for every kWh fed back into the grid.
Why it matters
An OEM and utility bundle that pays for connected hours as well as exported energy shows how home bidirectional charging is being commercialised in Germany. For CPOs and procurement teams, it sets a reference point for flexibility incentives and for bidirectional hardware demand at home.