onsemi launches EliteSiC M4, a fourth-generation silicon carbide platform
By Eve
onsemi has introduced EliteSiC M4, a trench-architecture silicon carbide platform aimed at EVs, AI data centres and energy infrastructure, as reported by EV-focused outlet coverage on 13 November 2026. The company claims up to 30% higher power density and 35% lower losses than the previous generation, with specific on-resistance cut by 20% to 50% and switching figures of merit improved by 67% in hard switching and 50% in soft switching. The 750 V bare die for automotive traction inverters is available now, with further products up to 1,200 V expected from 2027.
Why it matters
Silicon carbide efficiency and power density gains feed through to power electronics used in high-power charging hardware, so buyers should watch how quickly the 1,200 V parts arrive from 2027. The platform supports existing package formats, which could ease design-in for equipment makers, though all performance figures are onsemi's own claims.
Source
- Original title
- “onsemi introduces EliteSiC M4, its fourth-generation silicon carbide platform”
- Published
- 13 November 2026
- Updated
- 14 November 2026
In this story
- Topic
- EV Charging
- Place
- Global
- Tag
- onsemi
Related news
Edmonton homeowner asks Reddit how to charge a new Tesla mainly from rooftop solar and is warned about extra equipment
In a Reddit r/Solar thread, reported by The Cool Down, an Edmonton homeowner asked how to charge a new Tesla mostly from solar, particularly in summer when they would be selling and buying at peak rates. The poster said an electrician had offered to install a dedicated garage connection, and that the house's 100-amp service also supports a hot tub, air conditioning and other large loads. One commenter warned that charging purely from solar would need equipment such as a string inverter that monitors grid imports and exports and directs solar to specific loads, while another said they plug in on arrival home, charge to 80% daily before dark and have had no electric bill in 2 years.
Why it matters
The thread shows residential demand for solar-matched charging running into practical limits, including a 100-amp service and the need for load-aware equipment, which is relevant to anyone specifying home charging or energy management products. It also signals that installers and suppliers who can offer simple solar-aware charging control may find an opening, though this is one anecdotal forum discussion rather than market data.
Oklahoma to Washington EV road trip prompts advice on $7 Electrify America pass for 25% off charging
A driver planning a trip from Oklahoma to Washington in a 2024 Ford Mustang Mach E asked Reddit how to keep charging costs down, with ABRP estimating 38 to 42 hours of journey time based on roughly 250 miles of range. One commenter recommended Electrify America Pass Plus, which they said costs $7 per month, gives 25% off charging and carries no early cancellation fee, so $28 of eligible charging would cover the fee. The driver hopes to use Tesla Supercharger off peak rates and avoid prices of $0.60 per kilowatt hour or more, according to The Cool Down.
Why it matters
Long distance drivers are comparing membership discounts and price thresholds before they set off, and $0.60 per kilowatt hour is named as a price they want to avoid. CPOs and network operators can read this as evidence that subscription value and off peak pricing influence where drivers choose to charge.
US EV owner quoted $8,066.71 for a garage outlet expected to cost around $1,000
An electrician quoted $8,066.71 to install a 50-amp garage outlet for an EV owner who had expected to pay around $1,000, according to a report from The Cool Down based on a Reddit post. The job involved 25 feet of cable through an unfinished basement ceiling into an attached garage, with cable at $1,372.50, a breaker at $615.42 and a breaker lockout at $448.38, plus a separate $5,301.90 charge for the outlet, circuit, GFCI breaker and charger installation. Several Reddit users described installations costing substantially less, including ones with longer cable runs.
Why it matters
The gap between homeowner expectations and installer quotes shows how opaque and inconsistent residential charging installation pricing can be, which affects demand for home charging and the case for itemised, benchmarked quotes. Installers and CPOs working in the home and small commercial segment may find that clear pricing is a competitive advantage.